Decal Application Instructions

 

  1. On a warm sunny day start by cleaning surface well with whatever is appropriate for surface
  2. Wipe surface with rubbing alcohol to remove any residue from whatever you cleaned with
  3. Put drop of dish soap in squirt bottle full of water
  4. Line up decal where you want it to go (I used a little blue tape so I could get it kinda sorta straight
  5. Spray area where decal goes LIGHTLY with the soapy water – this allows for a little ability to reposition
  6. Apply decal and rub bubbles out with a squeegee, credit card, or similar and wait a while to allow any remaining water to dry
  7. Gently and oh so slowly and carefully remove the cover layer. I cut sections of it away as I worked my way across on the banner because it made it easier than wresting with the whole piece.